PRCM08-2DP - Cylindrical Inductive Proximity Sensors
Inductive Proximity Sensor
- SKU:
- PRCM08-2DP
- Category:
- Proximity Sensors
- Brand:
$55.81
Share product:
100% Guarantee Safe Checkout
Shipping calculated at the checkout
Specifications
- Shock
- 50 sq (50G) in each X, Y, Z direction for 3 times
- Material
- Casut: nickel plated brass (DIA. of sensing side 8 mm connector typeCase: SU303), washer: nickel plated iron, sensing side: PBT
- Indicator
- Operation indicator (red LED)
- Vibration
- 1.0 mm amplitude at frequency of10 to 55Hzin each X, Y, Z direction for 2 hours
- Connection
- Connector models
- Installation
- Non-flush
- Power voltage
- 12 - 24 VDC(=)(ripple P-P:10 %), operating voltage:10 -30 VDC(=)
- Connector type
- M12 Connector
- Control output
- 200 mA
- Residual voltage
- Max. 2V
- Sensing distance
- 2mm
- Protection circuit
- Surge protection circuit, output short over current protection circuit, reverse polarity protection circuit
- Response frequency
- 1kHz
- Dielectric strength
- Between the charging part and theCase: 1,50 VAC500z for 1 min
- Hysteresis(distance)
- Max. 15% of sensing distance
- Protection structure
- IP67(IEC standard)
- Current specification
- Current consumption: Max.10mA
- Insulation resistance
- 50M (50 VDC(=) megger)
- Sensing side diameter
- 8mm
- Standard sensing target
- 8�8�1mm(iron)
- Environment_Ambient humidity
- 35 to 95 %RH, storage: 35 to 95 %RH (no freezing or condensation)
- Unit weight (packaged weight)
- 10 g ( 32 g)
- Environment_Ambient temperature
- -25 to 70, storage30 to 80 (no freezing or condensation)
Description
The PRCM08-2DP is an M8 cylindrical inductive proximity sensor with 2 mm sensing range, PNP output, and a ceramic sensing face. The ceramic face provides enhanced resistance to abrasion, chemical exposure, and weld spatter compared to standard plastic-faced sensors. Used in welding fixtures, chemical processing equipment, and abrasive environments where standard sensor faces would degrade rapidly.