BS5-T2R-P - Groove-Depth 9mm Photomicro Sensors
Photomicro Sensor
- SKU:
- BS5-T2R-P
- Category:
- Proximity Sensors
- Brand:
$13.00
Share product:
100% Guarantee Safe Checkout
Shipping calculated at the checkout
Specifications
- Shock
- 15,000 sq (approx. 1,50G) in each X, Y, Z direction for 3 times
- Material
- Case: PBT, Sensing part: PC
- Indicator
- Operation indicator (red LED)
- Vibration
- 1.5mm amplitude (max. acceleration 196 sq) at frequency of10 to 2,000Hz in each X, Y, Z direction for 2 hours
- Connection
- Connector type
- Weight_Body
- Approx.30g
- Light source
- Infrared LED(940nm)
- Load current
- Max50mA
- Load voltage
- 30VDC(=)
- Sensing type
- Through-beam type
- Power voltage
- 5-24VDC (=) 10%(ripple P-P : max.10%)
- Response time
- Light ON: Max. 20?, Dark ON: Max50?
- Control output
- PNP open collector output
- Noise immunity
- The square wave noise (pulse width: 1?) by the noise simulator �240VDC(=)
- Operation mode
- Light Oark ON(set by control wire)
- Sensing target
- Opaque
- Residual voltage
- NPN:1.2VDC(=), PNP: 1.2VDC(=)
- Sensing distance
- 5mm
- Protection circuit
- Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit
- Response frequency
- 2kHz
- Current consumption
- Max.30mA
- Dielectric strength
- Between the charging part and theCase: 1,000 VAC50Hz for 1 minute
- Min. sensing target
- 0.8mm�2mm
- Hysteresis(distance)
- 0.05mm
- Protection structure
- IP50(IEC standard)
- Insulation resistance
- 20 M (250VDC(=) megger)
- Environment_Ambient humidity
- 35 to 85% RH, storage: 35 to 85% RH
- Environment_Ambient temperature
- -20 to 55, storage : -25 to 85
- Environment_Ambient illumination
- Fluorescent lamp: Max. 1,000lx(received illumination)
Description
The BS5-T2R-P is a 9 mm groove photomicrosensor with dual PNP output and right-angle connector termination. The right-angle cable exit reduces the installation depth requirement and prevents cable strain in applications with limited clearance behind the sensor mounting surface. Suitable for integration into compact actuator assemblies and tooling fixtures.