BS5-T1M-P - Groove-Depth 9mm Photomicro Sensors

Specifications

Shock

15,000 sq (approx. 1,50G) in each X, Y, Z direction for 3 times

Material

Case: PBT, Sensing part: PC

Indicator

Operation indicator (red LED)

Vibration

1.5mm amplitude (max. acceleration 196 sq) at frequency of10 to 2,000Hz in each X, Y, Z direction for 2 hours

Connection

Cable type

Weight_Body

Approx50

Light source

Infrared LED(940nm)

Load current

Max50mA

Load voltage

30VDC(=)

Sensing type

Through-beam type

Power voltage

5-24VDC (=) 10%(ripple P-P : max.10%)

Response time

Light ON: Max. 20?, Dark ON: Max50?

Control output

PNP open collector output

Noise immunity

The square wave noise (pulse width: 1?) by the noise simulator �240VDC(=)

Operation mode

Light Oark ON(set by control wire)

Sensing target

Opaque

Residual voltage

NPN:1.2VDC(=), PNP: 1.2VDC(=)

Sensing distance

5mm

Protection circuit

Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit

Response frequency

2kHz

Current consumption

Max.30mA

Dielectric strength

Between the charging part and theCase: 1,000 VAC50Hz for 1 minute

Min. sensing target

0.8mm�2mm

Hysteresis(distance)

0.05mm

Protection structure

IP50(IEC standard)

Insulation resistance

20 M (250VDC(=) megger)

Environment_Ambient humidity

35 to 85% RH, storage: 35 to 85% RH

Environment_Ambient temperature

-20 to 55, storage : -25 to 85

Environment_Ambient illumination

Fluorescent lamp: Max. 1,000lx(received illumination)