BS4-R2M-P - Groove-Depth 9 mm Photomicro Sensors with Built-In Connector

Specifications

Shock

15,000 sq (approx. 1,50G) in each X, Y, Z direction for 3 times

Weight

2.4 g

Material

Case: PBT, Sensing part: PC

Indicator

Operation indicator (red LED)

Vibration

1.5mm amplitude (max. acceleration 196 sq) at frequency of10 to 2,000Hz in each X, Y, Z direction for 2 hours

Connection

Connector type

Light source

Infrared LED

Load current

Max50A

Load voltage

24VDC(=)

Sensing type

Through-beam type

Power voltage

5-24VDC (=) 10%(ripple P-P : max.10%)

Response time

Light ON: Max. 20?,Dark ON: Max. 80?

Control output

PNP open collector

Noise immunity

The square wave noise (pulse width: 1?) by the noise simulator �240VDC(=)

Operation mode

Light Oark ON(Built-in)

Sensing target

Opaque

Residual voltage

NPN:1.2VDC(=), PNP: 1.2VDC(=)

Sensing distance

5mm

Protection circuit

Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit

Response frequency

2kHz

Current consumption

Max. 15mA

Dielectric strength

1,000VAC50z for 1 minute

Min. sensing target

0.8 mm � 1.8 mm

Hysteresis(distance)

0.05mm

Protection structure

IP50(IEC standard)

Insulation resistance

20 M (250VDC(=) megger)

Peak emission wavelength

940nm

Environment_Ambient humidity

35 to 85% RH, storage: 35 to 85% RH

Environment_Ambient temperature

-20 to 55, storage : -25 to 85

Environment_Ambient illumination

Fluorescent lamp: Max. 1,000lx(received illumination)